Authorised Retailer/Installer

   

 

  Sales and DCC Repairs
Esu Sound Decoders
SoundTraxx DCC Decoders
TCS DCC Decoders

DCC Solutions

  For DCC and Sound Installations 

 

ONLINE STORE

ESU LokSound 5 Sound Micro Decoder - 8 Pin

$185.00 $221.95

NEW SEPTEMBER 2019 Release


NOTE : This decoder does NOT include a speaker. Please visit our Speaker Section for a speaker suitable for all decoder brands that will best fit your installation.



This ESU LokSound 5 Micro DCC Sound decoder is supplied programmed with the DCC Solutions Custom Sound Project to suit your Australian Locomotive Model. :D


ESU is proud to present the brand-new LokSound 5 sound decoder and it is the most important member of the LokSound family.The LokSound 5 Micro is actually a "small miracle". With a footprint of 21mm x 10 mm it is by far the smallest LokSound decoder, which we have ever built. Thus it should fit into all N gauge and TT locomotives, but is also suitable for small H0 locomotives. All LokSound 5 Micro decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types.


The LokSound 5 Micro DCC decoder has a DCC & DC “Dual Mode” Operation, 2 or 4 Digit DCC Addressing, 14-28-128 Speed Steps, Locomotive Consisting and up to 32 Functions. It supports all DCC programming modes including POM (Programming on the Main) and also supports RailComPlus® that allows the decoders to register themselves automatically on suitable command stations.It also allows updating the internal firmware making it future-proof. This means, the internal software on the decoder‘s memory can be replaced by new versions supplied by ESU when new features, improvements or bug fixes are released.


You would expect excellent motor control from a LokSound Decoder and deservedly so! It would have to have the best motor control of any decoder as the motor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 Micro DCC decoder supplies sufficient motor current (up to 0.75 A) for the intended applications.


Here at DCC Solutions we have tweaked and programmed the decoder to provide super slow speeds perfect for those who like their locos to move off slowly or like to operate shunting. So many motors will run even better with the LokSound 5 sound decoders.


The LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.


Despite its small dimensions the LokSound 5 micro decoder has at least 6 amplified function outputs as well as one logic output. There are two more logic outputs on the Next18 interface, which alternately may be employed to control RC servos. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately.


Decoder Features:

Programmed with DCC Solutions LokSound 5 Custom Sound Project

NEXT18 Format with adapter 8 Pin Plug

0.7 Amp Current Rating

Operates on DCC & DC Analog

Next Generation BEMF with "Auto Tune"

6 Amplified Function Outputs

Special Lighting Effects

Supports use of LEDs for lighting

Class D Audio Power Amplifier with up to 3W Output Power

10 Channel Sound offers up to 16 Bit / 31250 kHz Hi-Fi Sound Quality

Up to 32 Function Mappings

Overload protection for motor and function outputs

Size 21mm x 10 mm (0.826" x 0.393")

Uses 4, 8 or 16 Ohm Speakers

Speaker Not Included


We have a large selection of Custom Sound Projects designed to suit the sounds of Australian locomotives which one of these projects is included with this decoder. :D


Also available are the sound files available from ESU for American and European Locomotives.


We also stock a great range of speakers including our own range of High Performance Dynamic Speakers for use with this Decoder. If your locomotive does not have a factory speaker installed, don't forget to check out our speaker section to include a speaker. Not sure which speaker is suitable for your locomotive then contact us first before making a decoder purchase.



Please Specify the Locomotive Model and Manufacturer for the correct sound project. Include your preferred Loco DCC Address

Item Added.
Adding Item.