top of page
ESU 58923 LokSound 5 DCC Sound Decoder - Wires with DCC Solutions Sound Project

This ESU LokSound 5 DCC Sound decoder is pre-programmed with a DCC Solutions Custom Sound Project to suit your Australian Locomotive Model.


NOTE : This decoder does NOT include a speaker.

Please visit our Speaker Section for a speaker suitable for all decoder brands that will best fit your installation.


This decoder is supplied with a loose wired harness, requiring a hardwired installation.


With the LokSound 5 Nano DCC, ESU has succeeded in developing an even smaller LokSound decoder! 

With a footprint of 19.6 mm x 8.5 mm x 5.3 mm., it is by far the smallest LokSound decoder, which we have ever built. Thus, it should fit into all N gauge and TT locomotives, but is also suitable for some small HO locomotives. 


The LokSound 5 Nano DCC decoder has a DCC & DC “Dual Mode” Operation, 2 or 4 Digit DCC Addressing, 14-28-128 Speed Steps, Locomotive Consisting and up to 32 Functions. It supports all DCC programming modes including POM (Programming on the Main) and also supports RailComPlus® that allows the decoders to register themselves automatically on suitable command stations. It also allows updating the internal firmware, making it future-proof. This means, the internal software on the decoder’s memory can be replaced by new versions supplied by ESU when new features, improvements, or bug fixes are released.


You would expect excellent motor control from a LokSound Decoder, and deservedly so! It would have to have the best motor control of any decoder, as the motor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus, the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs, and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 Micro DCC decoder supplies sufficient motor current (up to 0.75 A) for the intended applications.


The LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz, and thus we have finally achieved hi-fi sound quality on your layout. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.


Despite its small dimensions, the LokSound 5 micro decoder has 6 amplified function outputs as well as one logic output. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately.


Decoder Features:

  • E24 interface with adapter for single open wires
  • Blank Ready for Programming with the ESU LokProgrammer
  • 0.7 Amp Current Rating
  • Operates on DCC & DC Analog
  • Next Generation BEMF with “Auto Tune”
  • 6 Amplified Function Outputs
  • Special Lighting Effects
  • Supports use of LEDs for lighting
  • Class D Audio Power Amplifier with up to 3W Output Power
  • 10 Channel Sound offers up to 16 Bit / 31250 kHz Hi-Fi Sound
  • Up to 32 Function Mappings
  • Overload protection for motor and function outputs
  • Size 9.6 mm x 8.5 mm x 5.3 mm
  • Uses 4, 8 or 16 Ohm Speakers
  • Speaker Not Included


We have a large selection of Custom Sound Projects designed to suit the sounds of Australian locomotives, of which one of these projects is included with this decoder.


Simply select the brand of your model, the required sound project and your prefer DCC Address, and we will do the rest!


We also stock a great range of speakers, including our own range of High Performance Dynamic Speakers for use with this Decoder, so don't forget to check out our speaker section to include a speaker. Not sure which speaker is suitable for your locomotive, then contact us first before making a decoder purchase.


Also, some sound projects are available for certain American and United Kingdom locomotives. If you would like to purchase one, please contact us and make a request.

ESU 58923 LokSound 5 DCC Sound Decoder - Wires with DCC Solutions Sound Project

SKU: DCCS 58923
$245.00 Regular Price
$235.00Sale Price
    bottom of page