top of page
Nano Series Resistors 6.8k Ohm For LEDs (10 Pack)

DCCS Nano Series Resistors (10 Pack)

 

As the name “Nano” suggests, these are tiny resistors, with measurements of only 3.1×1.7 mm in size. The standard resistors found in retail stores are 6.0×2.3 mm, so these Nano Resistors require less space and perfect for use with LED installations in your model locomotives.

 

If you plan to use LEDs, then a resistor must be wired in series with the LEDs. It should at least have a rating between 470 Ohms for very bright light and 2.2 k Ohms for a more dimmed light.

You can experiment with larger resisters values 2.7k to 10k Ohms to further reduce the brightness of the LED in your model. 

 

Operating the LEDs without a resistor will lead to their immediate destruction! In some cases, it may even damage the function output of your DCC decoder.

 

Unlike light bulbs, LEDs are polarity sensitive. The negative (cathode) end of the LED is connected to a resistor in series to the function output of your DCC decoder, the positive (anode) end is connected to the blue function common wire on your DCC decoder.

 

Grab a pack and add it to your DCC installation tool box.

 

 

Specifications:

  • Product Range: Nano Series
  • Resistance: 6.8k Ohm
  • Power Rating: 250mW
  • Tolerance: ± 5%
  • Voltage Rating: 200V
  • Case Style: Axial Leaded
  • Element Type: Carbon Film

Nano Series Resistors 6.8k Ohm For LEDs (10 Pack)

SKU: RESISTNAN6K8
$2.00Price
    bottom of page